perpetual beta logo

SeeMeCNC H-1: 3D Printing for under $500

Submitted by Jason Griffey on Tue, 11/15/2011 - 23:21


Printer-friendly versionPrint

SeeMeCNC H-1: 3D Printing for under $500:

A kit-based 3D printer that is raising funding for production, and $450 gets you a complete tested 3D printer. Granted, you need a PC with a parallel port to use it (got one of those laying around?) and it works with very unfriendly software. But it’s a viable printer, and it doesn’t get any cheaper than this. 

Comments

seeMeCNC

I’m a cook. Mach 3 is a great piece of software. And if I can make it go, anyone can!

Submitted by timothy svec (not verified) on Sun, 02/19/2012 - 09:00.

unfriendly software

Jason, John here at seemecnc. What are you referring to as unfriendly? If its mach3, its very friendly for anyone who usescncs already, and has the ability to run other machines like mills, lathes etc… Which we are wanting to continue developing. We are not software oriented, but the hardware is what our focus is on. You can buy our hardware and use yiur arduino or similar. We brought low cost injectiin molding to the 3d reprap market. Our goal was to get the hardware available cheaper, and to improve the quality.

Thanks for the interest in us!

Email me anytime if you want to know more.

Submitted by johnoly aka seemecnc (not verified) on Fri, 11/18/2011 - 12:46.